Differences

This shows you the differences between two versions of the page.

--- manual:fpga [2017/10/16 08:33] – Richard Neumann
+++ manual:fpga [2017/10/16 21:05] – Igor Yefmov
@@ Line 1: / Line 1: @@
 ===== Specification for SUB2r Camera =====
 ^Parameter^Specification^
-|Model||
+| ||
-|FPGA|Xilinx Artix-7 100T|
+^  Model  ^^
-|Image Sensor|Interchangeable Camera Board|
+|  FPGA|[[https://www.xilinx.com/products/silicon-devices/fpga/artix-7.html|Xilinx Artix-7 100T]]|
-|Video Formats|YUV|
+|  Image sensor|Interchangeable camera board|
-|    |YUV-Cinema RGGB|
+|  Supported video formats|YUV|
-|    |NV12|
+|:::|YUV-Cinema RGGB|
-|Video Output||
+|:::|NV12|
+|  Max resolution/frame rate|4K@30uFPS, 1080p@60uFPS\\ max res/FPS limited by 6Gbps interface of the Artix FPGA|
+^  Video Output  ^^
 |  Primary|USB3.0 type C|
 |  Secondary|SFP+ SDI|
-|OS|Windows 10/Linux|
+|  OS|Windows 10/Linux/%%MacOS%%|
-|Image Control| |
+|  [[http://www.usb.org/developers/docs/devclass_docs/|UVC standard]]|1.1 and parts of 1.5|
-|  on sensor|I2C|
+^  Image Control  ^^
-|  post sensor|UVC 1.5|
+|  on sensor|I²C|
-|Power IN| |
+|  post sensor|UVC 1.1|
-| |USB3.0 5vDC|
+^  Power IN  ^^
-| |USB3.1 5vDC 3A|
+|  via USB3.0|5vDC|
-| |AUX 5vDC 3A|
+|  via USB3.1|5vDC 3A|
-|Power Out| |
+|  via AUX|5vDC 3A|
-| |2.5/5.0vDC isolated on board|
+^  Power Out  ^^
-|AUX I/O||
+|  isolated on board|2.5/5.0vDC|
-|JTAG|FPGA Program/DeBug|
+^  AUX I/O  ^^
-|GPIO|Direct Sensor Access|
+|  JTAG|FPGA program/debug|
-| |Synch|
+|  GPIO|Direct sensor access|
-| |Strobe|
+|  Synch|✔|
-|CamBoard|20 User Config Pins|
+|  Strobe|✔|
+|  %%CamBoard%%|20 user config pins|
 | |exm Powered Optics AF/PZ/PI/IR|
-|Audio||
+^  Audio  ^^
-|  On Board|dual -26dB|
+|  On-board mic|dual -26dB|
 |  AUX|3.5mm 4pole|
-|  |Stereo Out|
+|  Stereo Out|✔|
-|  |Mic in|
+|  Mic in|✔|
-|Visual|Programmable RGB LED|
+^  Visual  ^^
-|Housing||
+|  Programmable RGB LED|✔|
-|  Size|100mm W X 90mm D X 30mm H|
+^  Software bundle OS support  ^^
+|  Live video preview|Windows 10|
+|  Camera control center|Windows 10|
+|  Drivers to access non-UVC camera interfaces|Windows 10, version 1511+ (build 10586+)|
+^  Housing  ^^
+|  Dimensions|100mm W X 90mm D X 30mm H|
 |  Branding|Custom|
 |  Weight| aprox. 420 grams|
-|  Material| Aluminum Alloy|
+|  Material| Aluminum alloy|
-|  Cooling|Integrated Passive|
+|  Cooling|Integrated passive|
-|Mounting|1/4X20 std TriPod|
+|  Mounting #1|1/4X20 std %%TriPod%%|
-|Mounting|Side rack mount grooves|
+|  Mounting #2|Side rack mount grooves|
-|Side Rails|Interchangeable|
+|  Side rails|Interchangeable|