This is an old revision of the document!
Specification for SUB2r Camera
| Parameter | Specification |
|---|---|
| Model | |
| FPGA | Xilinx Artix-7 100T |
| Image Sensor | Interchangeable Camera Board |
| Video Formats | YUV |
| YUV-Cinema RGGB | |
| NV12 | |
| Video Output | |
| Primary | USB3.0 type C |
| Secondary | SFP+ SDI |
| OS | Windows 10/Linux |
| Image Control | |
| on sensor | I2C |
| post sensor | UVC 1.5 |
| Power IN | |
| USB3.0 5vDC | |
| USB3.1 5vDC 3A | |
| AUX 5vDC 3A | |
| Power Out | |
| 2.5/5.0vDC isolated on board | |
| AUX I/O | |
| JTAG | FPGA Program/DeBug |
| GPIO | Direct Sensor Access |
| Synch | |
| Strobe | |
| CamBoard | 20 User Config Pins |
| exm Powered Optics AF/PZ/PI/IR | |
| Audio | |
| On Board | dual -26dB |
| AUX | 3.5mm 4pole |
| Stereo Out | |
| Mic in | |
| Visual | Programmable RGB LED |
| Housing | |
| Size | 100mm W X 90mm D X 30mm H |
| Branding | Custom |
| Weight | aprox. 420 grams |
| Material | Aluminum Alloy |
| Cooling | Integrated Passive |
| Mounting | 1/4×20 std TriPod |
| Mounting | Side rack mount grooves |
| Side Rails | Interchangeable |