Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |
| code:fx3_api [2024/04/26 23:18] – [Camera peripherals] Igor Yefmov | code:fx3_api [2024/04/26 23:21] (current) – [Camera peripherals] Igor Yefmov |
|---|
| | Fan control and monitoring | ''0xE2'' | See [[#Fan control and monitoring function selector]] | depends on selected function | R/W | \(1\) or \(2\) | This API is available in gen4 v.114 and gen5 v.1\\ \\ For function selector values refer to [[#Fan control and monitoring function selector]] | | | Fan control and monitoring | ''0xE2'' | See [[#Fan control and monitoring function selector]] | depends on selected function | R/W | \(1\) or \(2\) | This API is available in gen4 v.114 and gen5 v.1\\ \\ For function selector values refer to [[#Fan control and monitoring function selector]] | |
| | Temperature sensor(s)|''0xE3''| See [[#Temperature sensor monitoring function selector]] | depends on selected function | R/O | \(1\) | This API is available in gen4 v.114 and gen5 v.1\\ \\ For function selector values refer to [[#Temperature sensor monitoring function selector]] below | | | Temperature sensor(s)|''0xE3''| See [[#Temperature sensor monitoring function selector]] | depends on selected function | R/O | \(1\) | This API is available in gen4 v.114 and gen5 v.1\\ \\ For function selector values refer to [[#Temperature sensor monitoring function selector]] below | |
| |mFT|''0xE4''| see Notes | see Notes | R/W | varies | For reads:\\ wValue is the number of data bytes to read from the last mFT command's response or a ''0'' to get the status, defined as follows:\\ <code c++>struct MftStatus final{ | |mFT|''0xE4''| see Notes | see Notes | R/W | varies | This API requires gen5 v.1\\ For reads:\\ wValue is the number of data bytes to read from the last mFT command's response or a ''0'' to get the status, defined as follows:\\ <code c++>struct MftStatus final{ |
| bool ready : 1; // LSB | bool ready : 1; // LSB |
| bool cmd_done : 1; | bool cmd_done : 1; |
