Differences

This shows you the differences between two versions of the page.

--- support:support [2019/02/08 20:30] – [SUB2r control center] Easier attention to see where to click. godlessozzy
+++ support:support [2023/03/08 18:48] (current) – [SUB2r control center] Igor Yefmov
@@ Line 1: / Line 1: @@
-====== Windows driver ======
+====== FX3 upgrade gone wild ======
-Information and download instructions about the current Windows driver to access camera's chipset can be found **[[manual:fx3_device_windows_10_driver|here]].**
+The stable version of FX3 image file can be downloaded from [[http://download.sub2r.com/SUB2r_FX3_1_1_4_5_53.img|this location (FX3 build# 53 for production version of Gen 3 camera)]].
+If things go real bad during an FX3 firmware upgrade and all attempts and loading a functional binary image onto the camera the last resort is to download [[http://download.sub2r.com/CypressSDK1.3.4-CC.zip|Cypress's Control Center utility]] and follow the [[support:FX3_bricked|instructions]].
+====== Windows driver ======
+The most current Windows driver is available on Microsoft's automatic Windows Update and is downloaded and installed onto your Windows PC once the SUB2r camera is simply plugged into the functioning USB port
 ====== SUB2r control center ======
+Download links for the SUB2r software bundle are found on the [[:start|main wiki page]]
   * **[[manual:sub2r_control_center|User guide]]**
-  * **[[sub2r_cc_revision_history|Revision history]]**
+  * **[[sub2r_cc_revision_history|Host software revision history (mainly SCC)]]**
+  * **[[firware_revision_history|Firmware revision history]]**