Differences

This shows you the differences between two versions of the page.

--- support:sub2r_cc_revision_history [2019/11/12 11:59] – [2.3.13: 2019-11-08] Igor Yefmov
+++ support:sub2r_cc_revision_history [2020/03/13 15:37] – [Upcoming version] Igor Yefmov
@@ Line 4: / Line 4: @@
 ===== Upcoming version =====
-  *
+  * SUB2r-lib:
+    * first iteration of adding a "%%SysInfo%%" support - will be automagically enabled once the core functionality is implemented on camera
+    * added a new sample program to demo the usage of the new %%SysInfo%% API and another one to demo the use of floating point values in API
+    * implemented ISO and INT USB endpoints
+    * fixed an issue with supporting "raw video" switch
+    * added simplified API support for DPC threshold and count
+    * adjusted the bit-width of the Black Level value to better match the practical range
+    * narrowed the sensor's Global Gain range to better represent the reality (the OV documentation is once again misleading...)
+    * properly reset version info when connecting to a different device (in multi-device setups)
+    * support for IEEE 754 floating point values' use in API
+    * "transaction" support for sensor group writes to properly handle nested requests
+    * fixed an issue with reading sensor's standby mode value
+  * SCC:
+    * improved Automated DPC algorithm
+    * "demo mode" (in Playground for now) - a way to cycle through a list of settings' files with a set delays after each load
+    * minor improvements in firmware update log's messaging
+    * properly handle the "raw video" mode in UI
+    * drag-n-drop support for 3 types of files: settings (.fws), FX3 code (.img), FPGA code (.bin)
+    * fixed a long-standing issue of loading settings' file breaking the video stream
+    * improved "group write" usage for writing multi-register values to sensor
+    * FPS fine-tuning and sensor binning controls (will be enabled with the next version of firmware)
+    * FPGA console: added a command to the list for switching the camera into Bootloader Mode (for programming a new firmware image with Cypress Control Center)
+    * removed Playground's AWB settings dialog as the functionality of using color temperature for white balance is coming to camera's firmware code in the next version
+    * Color Grading: HvS and LvS ranges are reworked to match the new Saturation limits coming in the next version of firmware
+    * LvL sliders were occasionally getting into negative values - this is fixed now
+    * switching to "Sensor" tab no longer forces a spontaneous reload of values onto camera
+    * autofunctions' auto-update interval limits are different between FX3 v.51 and v.52 - SCC automatically updates the range based on the version
+  * aria:
+    * UVC dialog box improvement: UVC spec allows for the STEP to be inferred from MIN and MAX values for most of Processing Unit's controls
+    * launching UVC dialog no longer writes just read values back to camera
 ===== 2.3.14: 2019-11-12 =====