Quick start guide for setting up SUB2r camera

If you only plan to be using the standard UVC controls you can just plug-n-play the camera (ignoring the “unknown devices” that are not recognized by the OS). However, if you plan on taking full advantage of the provided functionality and access all the internal camera controls with our SUB2r control center application - proceed with the instructions on this page.

In order to access the camera's functions beyond the standard UVC you need this Cypress FX3 driver. Follow these steps:

1. Download the driver package as a .zip file ¹⁾
2. Unzip the package
3. right-click on the cyusb3 file which displays its type as Setup Information (or has an .inf extension if you have those enabled to be displayed) and select Install
4. Confirm the Open operation
5. Confirm the Windows's account access verification
6. Make sure the Publisher is shown as SUB2r and proceed with the installation
7. Now you have the driver installed

Get the SUB2r control center application from Windows Store and install it. If the link doesn't work - just go to Windows Store and search for SUB2r control center there.

… and wait for Windows to configure it

Start using SUB2r control center and enjoy our product!

For more information see: