This is an old revision of the document!
Quick start guide for setting up SUB2r camera
Windows driver
In order to access the camera's functions beyond the standard UVC you need this Cypress FX3 driver.
Download the driver itself as a .zip
file 1)
- Unzip the package
- right-click on the
cyusb3
file which displays itstype
asSetup Information
(or has an.inf
extension if you have those enabled to be displayed) and selectInstall
- Confirm the
Open
operation - Confirm the Windows's account access verification
- Make sure the Publisher is shown as
SUB2r
and proceed with the installation - Now you have the driver installed
VC++ redistributable
Download and install VC++ 2017 redistributable for 64-bit from Microsoft's site (if you don't have this installed theSUB2r control center
will silently(!) fail to launch with no error message)
SUB2r control center
Get the SUB2r control center
application from Windows Store and install it. If the link doesn't work - just go to Windows Store
and search for SUB2r control center
there.
Ready-set-go!
Connect the camera
And wait for Windows to configure it
Done
Start using SUB2r control center
and enjoy our product!
1)
Visit SUB2r's Windows driver page for additional information