Differences

This shows you the differences between two versions of the page.

--- manual:quick_start_guide [2018/01/25 05:17] – ↷ Links adapted because of a move operation Igor Yefmov
+++ manual:quick_start_guide [2019/05/09 01:08] – [SUB2r control center] Igor Yefmov
@@ Line 2: / Line 2: @@
 If you only plan to be using the standard UVC controls you can just plug-n-play the camera (ignoring the "unknown devices" that are not recognized by the OS). However, if you plan on taking full advantage of the provided functionality and access all the internal camera controls with our ''SUB2r control center'' application - proceed with the instructions on this page.
+===== Step 1: download the bundle =====
+The software bundle can be downloaded from a link posted on the [[:start|start page of this Wiki]].
 ===== Windows driver =====
+> **N.B.**: The driver is part of the software bundle now and you should **only** follow the steps in this section if you really just need to install the driver and nothing else (which is very unlikely).
 In order to access the camera's functions beyond the standard UVC you need this Cypress FX3 driver. Follow these steps:
@@ Line 14: / Line 20: @@
 ===== SUB2r control center =====
-Get the ''SUB2r control center'' application from [[https://www.microsoft.com/en-us/store/p/sub2r-control-center/9n1bsssd7m6g|Windows Store]] and install it. If the link doesn't work - just go to ''Windows Store'' and search for ''SUB2r control center'' there.
+Download and install the ''SUB2r control center'' application from the link on the [[:start|start page of this Wiki]] and install it.
+If you need help with the installation - please watch this [[https://www.youtube.com/watch?v=GW2VtD9a3w8|tutorial video]].
 ===== Ready-set-go! =====
 ==== Connect the camera... ====