Differences

This shows you the differences between two versions of the page.

--- manual:lenseholders [2018/04/27 02:12] – created Igor Yefmov
+++ manual:lenseholders [2022/04/04 23:32] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-^  Lens Holders (mounts)  ^^
+^  Lens Holder (mounts)  ^^
-|  CMount|Internal threads 1-32 UNF 4.5\\ Mounts to camboard with (2) M2X0.4 screws at 22mm centers\\ Supports M12 lens with C to M12 adapter - M12x.5 internal threads|
+|CS Mount|Internal threads 1"-32 UNF|
-|     M12|Moard mount lens holder with 22mm center screw holes - metal H12mm reccomended|
+|M12 Admapter|Adpats from CS to M12x0.5mm|
+|Lens mount was changed from board mount to front plate/case mount to support the added weight of large "old glass" lenses||
+{{ :manual:lens_holder_specs_for_wiki.jpg?400 }}

SUB2r