This is an old revision of the document!
Specification for SUB2r Camera
PLEASE NOTE, There is no backwards compatibility for usb 2.0, due to both the power draw, and the data-throughput.
Parameter | Specification |
---|---|
Model | |
FPGA | Xilinx Artix-7 100T |
Image sensor | Interchangeable camera board |
Supported video formats | YUV |
YUV-Cinema RGGB | |
NV12 | |
Max resolution/frame rate | 4K@30uFPS, 1080p@60uFPS max res/FPS limited by 6Gbps interface of the Artix FPGA |
Video Output | |
Primary | USB3.0 type C |
Secondary | SFP+ SDI Internal expansion supports 3 additional SFP+ channels with Hirose BM14B(0.8)-20DS-0.4V(53) connector |
OS | Windows 10/Linux/MacOS |
UVC standard | 1.1 and parts of 1.5 |
Image Control | |
on sensor | I²C |
post sensor | UVC 1.1 |
Power IN | |
via USB3.0 | 5vDC |
via USB3.1 | 5vDC 3A |
via AUX | 5vDC 3A |
Power Out | |
isolated on board | 2.5/5.0vDC |
AUX I/O | |
JTAG | FPGA program/debug |
GPIO | Direct sensor access |
Synch | ✔ |
Strobe | ✔ |
Camera board | 20 user config pins example usage: Powered Optics AF/PZ/PI/IR |
Audio | |
On-board mic | dual -26dB |
AUX | 3.5mm 4pole |
Stereo Out | ✔ |
Mic in | ✔ |
Visual | |
Programmable RGB LED | ✔ |
Software bundle OS support | |
Live video preview | Windows 10 |
Camera control center | Windows 10 |
Drivers to access non-UVC camera interfaces | Windows 10, version 1511+ (build 10586+) |