This is an old revision of the document!
Specification for SUB2r Camera
Parameter | Specification |
---|---|
Model | |
FPGA | Xilinx Artix-7 100T |
Image Sensor | Interchangeable Camera Board |
Supported video formats | YUV |
YUV-Cinema RGGB | |
NV12 | |
Max resolution/frame rate | 4K@30uFPS, 1080p@60uFPS max res/FPS limited by 6Gbps interface of the Artix FPGA |
Video Output | |
Primary | USB3.0 type C |
Secondary | SFP+ SDI |
OS | Windows 10/Linux/MacOS |
UVC standard | 1.1 and parts of 1.5 |
Image Control | |
on sensor | I²C |
post sensor | UVC 1.1 |
Power IN | |
via USB3.0 | 5vDC |
via USB3.1 | 5vDC 3A |
via AUX | 5vDC 3A |
Power Out | |
isolated on board | 2.5/5.0vDC |
AUX I/O | |
JTAG | FPGA Program/Debug |
GPIO | Direct Sensor Access |
Synch | ✔ |
Strobe | ✔ |
CamBoard | 20 User Config Pins |
exm Powered Optics AF/PZ/PI/IR | |
Audio | |
On Board mic | dual -26dB |
AUX | 3.5mm 4pole |
Stereo Out | ✔ |
Mic in | ✔ |
Visual | |
Programmable RGB LED | ✔ |
Housing | |
Dimentions | 100mm W X 90mm D X 30mm H |
Branding | Custom |
Weight | aprox. 420 grams |
Material | Aluminum Alloy |
Cooling | Integrated Passive |
Mounting #1 | 1/4×20 std TriPod |
Mounting #2 | Side rack mount grooves |
Side Rails | Interchangeable |