This is an old revision of the document!
Specification for SUB2r Camera
| Parameter | Specification |
|---|---|
| Model | |
| FPGA | Xilinx Artix-7 100T |
| Image Sensor | Interchangeable Camera Board |
| Supported video formats | YUV |
| YUV-Cinema RGGB | |
| NV12 | |
| Max resolution/frame rate | 4K@30uFPS, 1080p@60uFPS |
| Video Output | |
| Primary | USB3.0 type C |
| Secondary | SFP+ SDI |
| OS | Windows 10/Linux/MacOS |
| UVC standard | 1.1 and parts of 1.5 |
| Image Control | |
| on sensor | I²C |
| post sensor | UVC 1.1 |
| Power IN | |
| via USB3.0 | 5vDC |
| via USB3.1 | 5vDC 3A |
| via AUX | 5vDC 3A |
| Power Out | |
| isolated on board | 2.5/5.0vDC |
| AUX I/O | |
| JTAG | FPGA Program/Debug |
| GPIO | Direct Sensor Access |
| Synch | ✔ |
| Strobe | ✔ |
| CamBoard | 20 User Config Pins |
| exm Powered Optics AF/PZ/PI/IR | |
| Audio | |
| On Board mic | dual -26dB |
| AUX | 3.5mm 4pole |
| Stereo Out | ✔ |
| Mic in | ✔ |
| Visual | |
| Programmable RGB LED | ✔ |
| Housing | |
| Dimentions | 100mm W X 90mm D X 30mm H |
| Branding | Custom |
| Weight | aprox. 420 grams |
| Material | Aluminum Alloy |
| Cooling | Integrated Passive |
| Mounting #1 | 1/4×20 std TriPod |
| Mounting #2 | Side rack mount grooves |
| Side Rails | Interchangeable |