Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
| manual:fpga [2017/10/16 08:21] – created Richard Neumann | manual:fpga [2022/04/04 23:32] (current) – external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ===== Specification for SUB2r Camera ===== | ===== Specification for SUB2r Camera ===== | ||
| - | ^Parameter^Specification^ | ||
| - | |Model|| | ||
| - | |FPGA|Xilinx Artix-7 100T| | ||
| - | |Image Sensor|Interchangeable Camera Board| | ||
| - | |Video Formats|YUV| | ||
| - | | |YUV-Cinema RGGB| | ||
| - | | |NV12| | ||
| - | |Video Output|| | ||
| - | | Primary|USB3.0 type C| | ||
| - | | Secondary|SFP+ SDI| | ||
| - | |OS|Windows 10/Linux| | ||
| - | |Image Control| | | ||
| - | | on sensor|I2C| | ||
| - | | post sensor|UVC 1.5| | ||
| - | |Power IN|| | ||
| - | ||USB3.0 5vDC| | ||
| - | ||USB3.1 5vDC 3A| | ||
| - | ||AUX 5vDC 3A| | ||
| - | Power Out|| | ||
| - | ||2.5/ | ||
| + | **PLEASE NOTE**, There is no backwards compatibility for usb 2.0, due to both the power draw, and the data-throughput. | ||
| + | |||
| + | ^Parameter^Specification^ | ||
| + | | || | ||
| + | ^ Model ^^ | ||
| + | | FPGA|[[https:// | ||
| + | | Image sensor|Interchangeable camera board| | ||
| + | | Supported video formats|YUV| | ||
| + | |::: | ||
| + | |:::|NV12| | ||
| + | | Max resolution/ | ||
| + | ^ Video Output | ||
| + | | Primary|USB3.0 type C| | ||
| + | | Secondary|SFP+ SDI\\ Internal expansion supports 3 additional SFP+ channels\\ with Hirose BM14B(0.8)-20DS-0.4V(53) connector| | ||
| + | | OS|Windows 10/ | ||
| + | | [[http:// | ||
| + | ^ Image Control | ||
| + | | on sensor|I²C| | ||
| + | | post sensor|UVC 1.1| | ||
| + | ^ Power IN ^^ | ||
| + | | via USB3.0|5vDC| | ||
| + | | via USB3.1|5vDC 3A| | ||
| + | | via AUX|5vDC 3A| | ||
| + | ^ Power Out ^^ | ||
| + | | isolated on board|2.5/ | ||
| + | ^ AUX I/O ^^ | ||
| + | | JTAG|FPGA program/ | ||
| + | | GPIO|Direct sensor access| | ||
| + | | Synch|✔| | ||
| + | | Strobe|✔| | ||
| + | | Camera board|20 user config pins\\ example usage: Powered Optics AF/ | ||
| + | ^ Audio ^^ | ||
| + | | On-board mic|dual -26dB| | ||
| + | | AUX|3.5mm 4pole| | ||
| + | | Stereo Out|✔| | ||
| + | | Mic in|✔| | ||
| + | ^ Visual | ||
| + | | Programmable RGB LED|✔| | ||
| + | ^ Software bundle OS support | ||
| + | | Live video preview|Windows 10| | ||
| + | | [[sub2r_control_center|Camera control center]]|Windows 10| | ||
| + | | [[fx3_device_windows_10_driver|Drivers]] to access non-UVC camera interfaces|Windows 10, version 1511+ (build 10586+)| | ||