This is a page where we list our "how-to" tutorial videos.

SUB2r Guide Tutorial 01: Install driver and software bundle

SUB2r Guide Tutorial 02: Minimum system and hardware requirements

SUB2r Guide Tutorial 03: Correcting PRNU - Pixel Response Non-Uniformity (also known as Defective Pixels Cancellation - DPC)

SUB2r Guide Tutorial +1: Fighting flicker: Reprogramming the PLL (phase lock loop) clock - or, SUB2r camera set custom FPS on the sensor chip

SUB2r Guide Tutorial 04: Upgrading the FX3 and FPGA firmware on your SUB2r camera. Includes information on how to recover from a failed upgrade