Differences

This shows you the differences between two versions of the page.

--- support:sub2r_cc_revision_history [2019/11/08 19:41] – [2.3.12: 2019-10-13] Igor Yefmov
+++ support:sub2r_cc_revision_history [2020/01/23 06:34] – [Upcoming version] Igor Yefmov
@@ Line 4: / Line 4: @@
 ===== Upcoming version =====
-  *
+  * SUB2r-lib:
+    * first iteration of adding a "%%SysInfo%%" support - will be automagically enabled once the core functionality is implemented on camera
+    * added a new sample program to demo the usage of the new %%SysInfo%% API and another one to demo the use of floating point values in API
+    * implemented ISO and INT USB endpoints
+    * fixed an issue with supporting "raw video" switch
+    * added simplified API support for DPC threshold and count
+    * adjusted the bit-width of the Black Level value to better match the practical range
+    * narrowed the sensor's Global Gain range to better represent the reality (the OV documentation is once again misleading...)
+    * properly reset version info when connecting to a different device (in multi-device setups)
+    * support for IEEE 754 floating point values' use in API
+    * "transaction" support for sensor group writes to properly handle nested requests
+  * SCC:
+    * improved Automated DPC algorithm
+    * minor improvements in firmware update log's messaging
+    * properly handle the "raw video" mode in UI
+    * drag-n-drop support for 3 types of files: settings (.fws), FX3 code (.img), FPGA code (.bin)
+    * fixed a long-standing issue of loading settings' file breaking the video stream
+    * improved "group write" usage for writing multi-register values to sensor
+    * FPS fine-tuning and sensor binning controls (will be enabled with the next version of firmware)
+    * FPGA console: added a command to the list for switching the camera into Bootloader Mode (for programming a new firmware image with Cypress Control Center)
+    * removed Playground's AWB settings dialog as the functionality of using color temperature for white balance is coming to camera's firmware code in the next version
+    * Color Grading: HvS and LvS ranges are reworked to match the new Saturation limits coming in the next version of firmware
+  * aria:
+    * UVC dialog box improvement: UVC spec allows for the STEP to be inferred from MIN and MAX values for most of Processing Unit's controls
+    * launching UVC dialog no longer writes just read values back to camera
+===== 2.3.14: 2019-11-12 =====
+  * frankie: (finally) addressed the USB enumeration notification (that Windows sends every single time there's **any** change in USB configuration anywhere in the system). The SCC should be much quieter now and only react on changes that it cares about (also should be honoring the "Track device change notifications" preference when a new device is plugged in)
 ===== 2.3.13: 2019-11-08 =====