Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| manual:quick_start_guide [2018/01/23 09:45] – Igor Yefmov | manual:quick_start_guide [2021/06/25 23:01] (current) – removed Igor Yefmov |
|---|
| === Quick start guide for setting up SUB2r camera === | |
| - [[manual:fx3_device_windows_10_driver|Windows driver]] page with a link to [[http://download.sub2r.com/SUB2r_driver_Windows10.zip|download the driver itself]] as a ''.zip'' file | |
| - Unzip the package | |
| - right-click on the ''cyusb3'' file which displays its ''type'' as ''Setup Information'' (or has an ''.inf'' extension if you have those enabled to be displayed) and select ''Install'' | |
| - Confirm the ''Open'' operation | |
| - Make sure the //Publisher// is shown as ''SUB2r'' and proceed with the installation | |
| - Now you have the driver installed | |
| - <del>Download and install VC++ 2017 redistributable for 64-bit from [[https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads|Microsoft's site]] (if you don't have this installed the ''SUB2r control center'' will silently(!) fail to launch with no error message)</del> | |
| - Our ''SUB2r control center'' [[https://www.microsoft.com/en-us/store/p/sub2r-control-center/9n1bsssd7m6g|on Windows Store]] - free to download and use | |
| - Connect the camera and let Windows configure it | |
| - Start using ''SUB2r control center'' and enjoy our product! | |
