PLEASE NOTE, There is no backwards compatibility for usb 2.0, due to both the power draw, and the data-throughput.
| Parameter | Specification |
|---|---|
| Model | |
| FPGA | Xilinx Artix-7 100T |
| Image sensor | Interchangeable camera board |
| Supported video formats | YUV |
| YUV-Cinema RGGB | |
| NV12 | |
| Max resolution/frame rate | 4K@30uFPS, 1080p@60uFPS max res/FPS limited by 6Gbps interface of the Artix FPGA |
| Video Output | |
| Primary | USB3.0 type C |
| Secondary | SFP+ SDI Internal expansion supports 3 additional SFP+ channels with Hirose BM14B(0.8)-20DS-0.4V(53) connector |
| OS | Windows 10/Linux/MacOS |
| UVC standard | 1.1 and parts of 1.5 |
| Image Control | |
| on sensor | I²C |
| post sensor | UVC 1.1 |
| Power IN | |
| via USB3.0 | 5vDC |
| via USB3.1 | 5vDC 3A |
| via AUX | 5vDC 3A |
| Power Out | |
| isolated on board | 2.5/5.0vDC |
| AUX I/O | |
| JTAG | FPGA program/debug |
| GPIO | Direct sensor access |
| Synch | ✔ |
| Strobe | ✔ |
| Camera board | 20 user config pins example usage: Powered Optics AF/PZ/PI/IR |
| Audio | |
| On-board mic | dual -26dB |
| AUX | 3.5mm 4pole |
| Stereo Out | ✔ |
| Mic in | ✔ |
| Visual | |
| Programmable RGB LED | ✔ |
| Software bundle OS support | |
| Live video preview | Windows 10 |
| Camera control center | Windows 10 |
| Drivers to access non-UVC camera interfaces | Windows 10, version 1511+ (build 10586+) |