===== Specification for SUB2r Camera =====

**PLEASE NOTE**, There is no backwards compatibility for usb 2.0, due to both the power draw, and the data-throughput.

^Parameter^Specification^
| ||
^  Model  ^^
|  FPGA|[[https://www.xilinx.com/products/silicon-devices/fpga/artix-7.html|Xilinx Artix-7 100T]]|
|  Image sensor|Interchangeable camera board|
|  Supported video formats|YUV|
|:::|YUV-Cinema RGGB|
|:::|NV12|
|  Max resolution/frame rate|4K@30uFPS, 1080p@60uFPS\\ max res/FPS limited by 6Gbps interface of the Artix FPGA|
^  Video Output  ^^
|  Primary|USB3.0 type C| 
|  Secondary|SFP+ SDI\\ Internal expansion supports 3 additional SFP+ channels\\ with Hirose BM14B(0.8)-20DS-0.4V(53) connector|
|  OS|Windows 10/Linux/%%MacOS%%|
|  [[http://www.usb.org/developers/docs/devclass_docs/|UVC standard]]|1.1 and parts of 1.5|
^  Image Control  ^^
|  on sensor|I²C|
|  post sensor|UVC 1.1|
^  Power IN  ^^
|  via USB3.0|5vDC|
|  via USB3.1|5vDC 3A|
|  via AUX|5vDC 3A|
^  Power Out  ^^
|  isolated on board|2.5/5.0vDC|
^  AUX I/O  ^^
|  JTAG|FPGA program/debug|
|  GPIO|Direct sensor access|
|  Synch|✔|
|  Strobe|✔|
|  Camera board|20 user config pins\\ example usage: Powered Optics AF/PZ/PI/IR|
^  Audio  ^^
|  On-board mic|dual -26dB|
|  AUX|3.5mm 4pole|
|  Stereo Out|✔|
|  Mic in|✔|
^  Visual  ^^
|  Programmable RGB LED|✔|
^  Software bundle OS support  ^^
|  Live video preview|Windows 10|
|  [[sub2r_control_center|Camera control center]]|Windows 10|
|  [[fx3_device_windows_10_driver|Drivers]] to access non-UVC camera interfaces|Windows 10, version 1511+ (build 10586+)|