User Tools

Site Tools


code:fx3_hvci_and_fpga_i_c_commands

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
code:fx3_hvci_and_fpga_i_c_commands [2020/04/12 11:13]
Igor Yefmov [0x00-0x07 - FPGA general access]
code:fx3_hvci_and_fpga_i_c_commands [2020/05/14 22:05] (current)
Line 45: Line 45:
  
 ====== FX3 Host Vendor Command Reference ====== ====== FX3 Host Vendor Command Reference ======
 +Please refer to [[code::​fx3_vr_cmd|Vendor Request Commands'​ reference]] page for details.
  
 The following tables provide information on how to access the camera'​s functionality for ''​FX3 Host Vendor Command Interface''​. The address space is split into smaller chunks, grouped by common functionality:​ The following tables provide information on how to access the camera'​s functionality for ''​FX3 Host Vendor Command Interface''​. The address space is split into smaller chunks, grouped by common functionality:​
Line 149: Line 150:
 |FPGA control|''​0x06''​|R/​W| |Global control of the FPGA's functionality| |FPGA control|''​0x06''​|R/​W| |Global control of the FPGA's functionality|
 |:::​|:::​|:::​|''​7''​ FPGA config enable|If bit ''​7''​ is set, the GPIF becomes read only and waits for an update bitstream| |:::​|:::​|:::​|''​7''​ FPGA config enable|If bit ''​7''​ is set, the GPIF becomes read only and waits for an update bitstream|
-|:::​|:::​|:::​|''​6''​ on-board fan| (FX3-53+) ''​1''​ turns the on-board fan on, ''​0''​ turns it off |+|:::​|:::​|:::​|''​6''​ on-board fan| (FPGA-72+) ''​1''​ turns the on-board fan on, ''​0''​ turns it off |
 |:::​|:::​|:::​|''​5''​ RAW Mode|Setting bit ''​5''​ and clearing bit ''​0x06::​2''​ will enable RAW mode output (4K Only)| |:::​|:::​|:::​|''​5''​ RAW Mode|Setting bit ''​5''​ and clearing bit ''​0x06::​2''​ will enable RAW mode output (4K Only)|
 |:::​|:::​|:::​|''​4''​ Video Format|Bit ''​4''​ selects between NV12 ('​1'​) and YUY2 ('​0'​) output formats | |:::​|:::​|:::​|''​4''​ Video Format|Bit ''​4''​ selects between NV12 ('​1'​) and YUY2 ('​0'​) output formats |
/home/adminsub2r/public_html/dokuwiki/data/pages/code/fx3_hvci_and_fpga_i_c_commands.txt · Last modified: 2020/05/14 22:05 (external edit)